Step by step cleaning your floor

Step by step cleaning your floor

A clean floor is not only aesthetically pleasing, but also essential for a healthy living environment. Maintaining your floor is an important task to extend the life of your floor and ensure that it always looks its best. In this article, we will show you how to clean your floor step by step so that your floor looks like new.

Step 1: Remove dust and dirt

Before you start the real cleaning work with cleaning products from, it is necessary to first remove all dust and dirt from the floor. This can be done using a vacuum cleaner or a broom. If you use a vacuum cleaner, make sure it is suitable for the type of floor you have. With a wooden floor, it is convenient to use a vacuum cleaner with a parquet brush. This way you can avoid scratching the floor. If you use a broom, make sure not to skip the nooks and crannies.

Step 2: Mop the floor

If your floor is still dirty, it’s time to mop the floor. To do this, use a mop and a bucket filled with warm water and detergent. Wring out the mop well before you start mopping. After all, you don’t want too much water on the floor. Start at the door and gradually work your way to the other side of the room. If the mop gets too dirty, clean it before continuing. You can also use a steam cleaner to clean the floor. A steam cleaner not only removes dirt and stains but also kills bacteria and other microorganisms.

Step 3: Remove stains

If there are still stains on the floor, use an appropriate cleaning agent to remove them. Never use harsh cleaners or abrasives on your floor, as they can damage the floor. For stubborn stains, consider using a specialty cleaner, depending on the type of floor you have. You need to make sure the cleaning product is appropriate for your type of floor. Always test the cleaning product on a small, inconspicuous area of the floor before using it on the entire floor.

Step 4: Rinse the floor

When you finish cleaning the floor, rinse it with clean water to remove all remaining soap residue. Use a clean mop to rinse the floor, making sure to remove all remaining soap. This is important because soap residue can damage the floor and make it slippery, increasing the risk of slipping.

Step 5: Dry the floor

Once you have finished cleaning and rinsing the floor, allow it to dry completely before walking on it again. Use a clean dry cloth to dry the floor and make sure no moisture is left behind. If moisture still remains on the floor, it can cause damage to the floor and increase the risk of slipping. Open windows and doors to allow air to circulate and speed up drying time. Also, do not walk on the floor until it is completely dry. Good luck!

Step by step cleaning your floor .